DS1100DS1101DS1102 DS1206

DS1101 Programmable 3.5-channel
RS232 Controller

The DS1101 is a compact Tibbo BASIC/C-programmable controller with Ethernet and optional Wi-Fi* connectivity. The DS1101 targets serial-over-IP and serial control applications.

The DS1101 features a multi-channel RS232 to ethernet port. The device has a single DB9M connector and is priced as a single-port product, yet packs 3.5 independent serial channels.

Another feature of the DS1101 is its software-controlled power output on pin 9 of the DB9 (serial port) connector — you can power an attached serial device directly through the DS1101. Alternatively, the DS1101 itself can be powered through the pin 9. The device can also be powered via its power jack or the available power-over-Ethernet module*.

In addition, the DS1101 can be equipped with a 96x32 monochrome OLED display.

There are eight LEDs on the device's front: green and red main status LEDs, yellow Ethernet link LED, and five blue LEDs, which can be used for Wi-Fi signal strength indication and other purposes. A buzzer is provided as well.

Each DS1101 is supplied with the DIN rail and wall mounting plates.

The DS1101 comes preloaded with a fully functional serial-over-IP (SoI) application that turns the DS1101 into a powerful serial over IP (SoI) device, a.k.a. the device server.

* Wi-Fi and power-over-Ethernet options are mutually exclusive.

Key Features

10/100 Base-T Ethernet port
3.5-channel RS232 port
High-performance CPU (T1000)
Power in/out on DB9 (pin 9)
Optional Wi-Fi
Optional OLED display
Optional power-over-Ethernet (PoE)
Onboard RTC (no backup battery)
1MB flash for TiOS, application code, and file system
2048-byte EEPROM

OPC Server Support



  • 10/100Base-T, auto-MDIX Ethernet port.

  • 3.5-channel RS232 port on DB9M connector:

    • TX, RX, RTS, CTS, DTR, DSR, DCD lines;
    • Baudrates of up to 921,600bps;
    • None/even/odd/mark/space parity modes;
    • 7 or 8 bits/character;
    • RTS/CTS and XON/XOFF flow control;
    • Flexible mapping with 15 different options, such as:
      • A single channel: RX, TX, CTS, RTS, DSR, and DTR lines;
      • 3.5 channels: RX, TX, RX2, TX2, RX3, TX3, and RX4 lines;
      • 13 additional arrangements.
  • Based on the high-performance T1000 IC.

  • Programmable "12V" power output on pin 9 of the DB9;

  • Pin 9 can also be used for "12V" power input.

  • Optional 802.11b/g Wi-Fi interface.

  • Optional 96x32 monochrome OLED display.

  • Optional power-over-Ethernet (PoE).

  • Built-in buzzer.

  • Onboard RTC (no backup battery)

  • 1MB flash memory for TiOS, application code, and file system.

  • 2048-byte EEPROM for data storage.

  • Eight LEDs:

    • Green and red main status LEDs;
    • Yellow Ethernet link LED;
    • Five blue LEDs (for Wi-Fi signal strength indication, etc.).
  • Software-controlled onboard PLL.

  • Power: 12VDC nominal (9 ~ 18V).

  • Dimensions (LxWxH): 90x48x25mm.

  • Operating temperature range: -5 ~ +70C.

  • Firmware is upgradeable through the serial port or network.

  • CE- and FCC-certified.

Included Accessories:

  • DIN rail mounting plate
  • Wall mounting plate and two screws

Optional Accessories:

See Also:

  • DS1100 single-channel RS232 controller
  • DS1102 3-channel RS232/422/485 controller

*For this device can be used as crossover cable too


Create powerful, network-enabled applications in Tibbo BASIC and/or Tibbo C. Learn more...

Platform objects:

  • beep — generates buzzer patterns.
  • button — monitors the MD (setup) button.
  • fd — manages flash memory file system and direct sector access.
  • io — handles I/O lines, ports, and interrupts.
  • lcd — controls the OLED display.
  • net — controls the Ethernet port.
  • pat — "plays" patterns on a pair of status LEDs.
  • ppp — accesses the Internet over a serial modem (GPRS, etc.).
  • pppoe — accesses the Internet over an ADSL modem.
  • romfile — facilitates access to resource files (fixed data).
  • rtc — keeps track of date and time.
  • ser — controls the serial channels.
  • sock — socket comms (up to 16 UDP, TCP, and HTTP sessions).
  • stor — provides access to the EEPROM.
  • sys — in charge of general device functionality.
  • wln — handles the Wi-Fi interface.

Function Groups: String functions (27 in total!), date/time conversion functions (8), encryption/hash calculation functions (RC4, MD5, SHA-1), and more.

Variable Types: Signed and unsigned 8-bit, 16-bit, and 32-bit types; floating point and string types; user-defined arrays and structures.

Files and Documentation

TiOS Firmwaretios-ds1101w-3_60_06.bin
DocumentationDS110x Hardware Manual
DS1101W Programming Platform
CE Certificateds110x-ce.pdf
FCC Certificateds110x-fcc.pdf

Order your DS1101

DS1100DS1101DS1102 DS1206